If Guangzhou is on your October itinerary, the wheel halls open 15 October and close out five days later — Phase 1 of the 140th Canton Fair, 15–19 October, where vehicles and parts suppliers exhibit at the Canton Fair Complex. Most wheel buyers leave a fair with business cards and a follow-up list. The better outcome is leaving with loading dates, and that depends on what a supplier can ship once the fair ends. HAIJI WHEELS starts from a different position: 116,597 pcs of alloy wheels already on the shelf across more than 40 vehicle fitments, 815 of them 18-inch variants. What follows is the stock program PCD by PCD, the mold library behind less common sizes, and the commercial mechanics of turning a stand conversation into a loaded container.
Phase 1 Timing: Vehicles and Parts, 15–19 October 2026
The 140th Canton Fair runs in three phases from 15 October to 4 November 2026. Phase 1 covers advanced manufacturing, including vehicles and parts — the section where alloy wheel suppliers exhibit. Five days is enough to complete three tasks: inspect finishes and coatings in person, confirm mold coverage for your size range, and align container programs for the season ahead.
One note from practice: wheel sourcing at fairs usually stalls on vague specifications. Bring your fitment list — PCD, center bore, offset range and finish mix — and every conversation turns concrete.
The 18-Inch Stock Program, PCD by PCD
Eighteen-inch is a volume size in many replacement markets, and it is a size for which HAIJI WHEELS lists 815 variants ready to ship. The current 18-inch stock breaks down by PCD as follows:
| PCD | 18-inch SKUs in stock | Typical fitments |
|---|---|---|
| 5×112 | 377 | Mercedes-Benz, Audi, VW, Skoda |
| 5×114.3 | 178 | Toyota, Lexus, Kia, Honda, Nissan |
| 5×120 | 116 | BMW, Land Rover |
| 6×139.7 | 65 | Land Cruiser, Prado, Hilux, Fortuner |
Two models currently in stock show the specification level on offer:
- F603S1299 — 18×8.0J, ET45, 5×112, CB57.1, black machine face.
- F615665 — 18×8.0J, ET35, 5×112, CB66.45, matte black.
The 5×112 group is listed on the 5×112 wheels page, the 5×114.3 group on the 5×114.3 wheels page, and the Land Cruiser and pickup group on the 6×139.7 wheels page. Reviewing these before Phase 1 means arriving with a shortlist instead of a blank page.
Mold Library: More Than 4,600 Molds Across 15–26 Inch
Stock answers this season’s demand; molds answer the next one. The HAIJI WHEELS mold library covers more than 4,600 molds spanning 15 to 26 inch, across cast, flow-formed and forged production. Cast carries mainstream replacement volumes. Flow-formed designs come in where a program wants lower weight and higher strength without changing the design language. Forged sits at the specialized end — load ratings and impact requirements that the two cheaper processes cannot honestly meet.
This is also the practical answer to the classic fair question — “can you do my size?” If a size or design in the 15–26 inch span is not in current stock, the mold library is what lets a sampling conversation end with a production plan instead of an exchange of business cards.
Container Economics: Mixed PCD, Sample Sets and Inspection
Three commercial details decide how a fair meeting converts into an order:
- Mixed-PCD loading. One container can combine PCD groups — 5×112 sedans alongside 6×139.7 pickups, for example — so the container matches your customer mix rather than a single SKU.
- Sample sets. Samples are sold as sets of 4 pcs per PCD group, payable by PayPal or card. This is the low-commitment way to verify fitment and finish on a local car before ordering a container.
- Inspection and terms. Every order passes pre-shipment inspection before loading, container orders settle by T/T, and quotations remain valid for 30 days.
The sequence that works around the fair is short: confirm models during Phase 1, take a sample set home to test on local vehicles, then load the container against the 30-day quotation with the inspection report closing the loop.
Frequently Asked Questions
Can I mix different PCDs in one container?
Yes — mixed-PCD loading is supported, so 5×112, 5×114.3, 5×120 and 6×139.7 stock can be combined in the proportions your market needs. Share your planned mix during the meeting so container loading can be calculated.
Can I order samples before committing to a container?
Samples are sold as sets of 4 pcs per PCD group, and sample orders can be paid by PayPal or card. Full container orders are settled by T/T.
How long is a quotation valid?
Quotations are valid for 30 days from issue — enough time to complete sampling and confirm the container program after the fair closes.
What quality checks happen before shipment?
Every order undergoes pre-shipment inspection before loading. Orders draw on the current stock program — 116,597 pcs on hand across 40+ fitments — rather than starting a production run from zero.
Meeting HAIJI WHEELS in Guangzhou: our export team will be in Guangzhou during the 140th Canton Fair — contact us to schedule a meeting via the contact page, on WhatsApp at +86 153 8401 5596, or by email at [email protected]. Bring your fitment list and target quantities; with 815 eighteen-inch variants on the shelf, many programs can move from meeting to loading without waiting on production.